• Nederlands
  • English
  • Deutsch
  • Español
  • Italiano
  • 한국어

Navigation

TQC Sheen
  • Login
  • Quote list 0
    Your list is currently empty.
  • Home
    • Profile
    • Legal
    • Terms and Conditions
  • Products
    • Applications
  • News
    • News
    • Trade Fairs
    • Newsletter
    • Vacancies
  • Service
    • Software downloads
    • Repairs / Calibrations
    • Service Form
    • Calculators
  • Contact
    • Contact form
    • Addresses
    • Locate a distributor
  • English
    • Nederlands
    • Deutsch
    • Español
    • Italiano
    • 한국어
TQC Sheen > Products > Application > Hardness / Scratch Resistance > Scratch Resistance / Wear > Scrub Abrasion and Washability Tester

Product Added to Quote View Quote List

Scrub Abrasion and Washability Tester

The Scrub Abrasion and Washability Tester is used to test the resistance of paint, varnish or coatings to scratching, wearing, and color loss due to wet or dry abrasion, by simulating everyday wear from cleaning actions or general use

Get a Quote
Customer Rating (0) Submit a Review
Working...
Product Added to Quote
Remove from Quote
Product Added to Quote
Remove from Quote
Category: Scratch Resistance / Wear Standards: ASTM D2486, ASTM D3450, ASTM D4213, ASTM D4828, ASTM F1319, ISO 11998
  • Product Description
  • Additional Details
  • Documents
  • Standaarden
  • Order Information

The Scrub Abrasion and Washability Tester is used to test the resistance of paint, varnish or coatings to scratching, wearing, and color loss due to wet or dry abrasion, by simulating everyday wear from cleaning actions or general use. The test is either used as a “pass or fail” test by testing to a specified number of strokes or defining the minimum number of strokes at which a coating fails by checking at regular intervals. The Scrub Abrasion and Washability Tester is suitable for a wide range of scrub, abrasion and washability tests that are in use. The modular system significantly decreases the costs for laboratories to comply to many standards.

Traverse Speed

1 – 60 cycles per minute

Traverse Speed Accuracy

+/- 1% of set speed

Stroke length

20 – 300 mm / 0.39 – 11.81 in

Stroke Length Accuracy

+/- 0.01 mm

Pump Flow Rate

0.0 – 3.0 ml per minute / 0.0 – 0.79 GPH

Max. Panel Length

350 mm / 13.78 in

Max. Panel Width

70 mm / 2.76 in

Max. panel thickness

35 mm / 1.38 in

Dimensions

490x640x235 mm / 19.3×25.2×9.24 in

Height with pumps

530 mm / 20.87 in

Mass

33 kg

Power

100 – 240VAC / 50 – 60Hz

Power Consumption

Max. 50 Watt

Display

480 x 272 pixel TFT panel

Controls

5-key Navigation Switch, Mouse and Keyboard Optional

Product Documents

en

  • Datasheet (pdf)
  • Ordering Matrix (pdf)
  • Standards Configuration Table (pdf)
  • Chemical Resistance (pdf)
  • Manual (pdf)
  • Leaflet (pdf)
Icon Legend:
Calibration Possibility Declaration of conformity Calibration Certificate
Product TQC Scrub Abrasion and Washability Tester
Declaration of Conformity available
View Quote
View Quote
Product TQC Scrub Abrasion and Washability Tester-Basic
Declaration of Conformity available
View Quote
View Quote
accessories
MEK tester Pro Tool 
Working...
Product Added to Quote
Remove from Quote
Sponge pads for tool AB5050, set 5 pcs
Working...
Product Added to Quote
Remove from Quote
Abrasive pads for tool AB5050, set 5 pcs
Working...
Product Added to Quote
Remove from Quote
Crockmeter / MEK test, DIN 55654, DIN 55654, includes TQC MEK / Crockmeter tool weight set (total weight 200g) felt and Viton O-ring set
Working...
Product Added to Quote
Remove from Quote
Metal shims for ASTM D2486 Small (set of 4)
Working...
Product Added to Quote
Remove from Quote
Metal shims for ASTM D2486 Large (set of 4)
Working...
Product Added to Quote
Remove from Quote
Tube set for Washability Pumps, 4 pcs
Working...
Product Added to Quote
Remove from Quote
Tube set for Washability Tester “Complete”, 8 pcs
Working...
Product Added to Quote
Remove from Quote
Weight 1000g/35.3oz for washability tools
Working...
Product Added to Quote
Remove from Quote
Weight 500g/17.6oz for washability tools
Working...
Product Added to Quote
Remove from Quote
Weight 300g/10.6oz for washability tools
Working...
Product Added to Quote
Remove from Quote
Weight 54g/1.9oz for washability tools
Working...
Product Added to Quote
Remove from Quote
Weight 45g/1.6oz for washability tools
Working...
Product Added to Quote
Remove from Quote
Heavy weight support tool – Mandatory in: ASTM D 2486, ASTM D3450 Optional in: DIN 53778, ASTM D4213-92, ASTM D4828, ISO 11998, ASTM ...
Working...
Product Added to Quote
Remove from Quote
Cloth Holder Tool
Working...
Product Added to Quote
Remove from Quote
TQC Sponge tool large suitable for ASTM D4828 / D3450
Working...
Product Added to Quote
Remove from Quote
Glass plates ASTM D2486 for Washability test, set 2 pcs
Working...
Product Added to Quote
Remove from Quote
Spare Sponge pads for tool AB5012, 5 pcs Dimensions sponge(LxWxH): 138x50x30mm Sponges can easily be cut into the ...
Working...
Product Added to Quote
Remove from Quote
Spare Nylon brush for tool AB5011
Working...
Product Added to Quote
Remove from Quote
Spare Wild boar brush for tool AB5010
Working...
Product Added to Quote
Remove from Quote
Weight 100g/3.5oz for washability tools
Working...
Product Added to Quote
Remove from Quote
Weight 60g/2.1oz for washability tools
Working...
Product Added to Quote
Remove from Quote
Abrasive tool complete (135g/4.76oz) ISO 11998, includes; Aluminium pad holder Inner dimensions holder 92x41mm Outer dimensions holder 94x43mm ...
Working...
Product Added to Quote
Remove from Quote
Sponge tool complete (232g/8.12oz) ASTM D4213-92, ASTM D4828, includes; Stainless steel holder Inner dimensions holder 92x41mm Outer ...
Working...
Product Added to Quote
Remove from Quote
Nylon Brush tool complete (454g/16.01oz) ASTM D2486, includes; Stainless sleel brush holder Inner dimensions holder 92x41mm Outer dimensions ...
Working...
Product Added to Quote
Remove from Quote
Wild Boar Brush tool complete (250g/8.82oz) DIN 53778, includes: Stainless steel holder Inner dimensions holder 92x41mm Outer dimensions holder 94...
Working...
Product Added to Quote
Remove from Quote
TQC Washability opacity scrub charts, 100 pcs
Working...
Product Added to Quote
Remove from Quote
Spare abrasive pads for tool AB5013, set 5 pcs
Working...
Product Added to Quote
Remove from Quote
where to apply
  • Abrasives
    Scrub
    Test how fast a surface is fully sanded with the Scrub Abrasion and Washability Tester.
  • Seat Covers
    Wear
    Test the wear of seat covers. For example in cars or aircrafts.
  • Detergents
    Remove stains
    Test how to remove stains with various detergents.
  • Phone Screens
    Scratches
    Test the scratch resistance of phone screens to prevent damage.
  • Coating
    Scratch Resistance
    The Scrub Abrasion and Washability Tester will be found in the coating industry to test the scratch resistance of, among othesrs, wall paints and varnishes.
  • Kitchen Counters
    Scratch resistance
    Test the scratch resistance of counter tops with the Scrub Abrasion and Washability Tester.
  • Carpet
    Wear
    Test the wear of floor coverings. Floor coverings of good quality last for a minimum of ten years.
Features
  • Preset

    Preset range option.

  • Triple i Control

    Easy intuitive operating interface with Triple i Control (Intelligent Illumination Interface).

  • Display

    Full color display.

  • Software

    Easy to update software.

  • Movement

    Manual movement.

  • Accessories

    Compatible with a large range of accessories.

Preset range option.

INSTRUMENT CONTROLS AND FUNCTIONS

Flexible adaptation to many tests

The TQC Scrub Abrasion and Washability Tester allows for the most flexible
adaptation of the wide range of scrub, abrasion and washability tests that are in
use. First the base apparatus has to be selected from two models. The TQC Scrub
Abrasion and Washability Tester - Basic  (Art. Nr.  AB6010) without pumps for dry
tests, and the TQC Scrub Abrasion and Washability Tester - Standard
(Art. Nr.  AB6000) with pumps for dry and wet tests. Each base unit is completely
flexible and allows for easy exchange of the tools used for testing. A variety of tests
are possible, with just small modifications to make the device suitable for other tests.
This modular system significantly decreases the costs for laboratories to comply to
many standards.

To select the right parts, we refer to the custom Ordering Matrix and the
Standard Configuration Table.

Customer

Case Study

Question

Apparatus

Confidential (Yachtbuilder)

Test and quantify the wear on yachtcoatings caused by fendermaterial.

AB6000 TQC Scrub Abrasion and Washability Tester
AB5020 Universal Material Holder Tool
+ additional weights

Procedure

Case Study

Yachtbuilder was experiencing customers claims about marks and wear in the topcoat of their yachts located
at the positions of the fenders. It was suspected that either the fender material or the plasticizers in the fender
material was somehow aggressive to the yacht’s topcoat.

Two different trays were used to perform two tests simultaneously (wet and dry) .

Test panels, coated with the proper topcoat were positioned at the bottom of the scrub tester.

The tools holders were each equipped with the fender material and an additional weight of 1000 gram.

One test was performed dry.

One test was performed with dosing sea (salt) water at rate of 0.2ml/min .

Stroke length was set at 300mm.

Stroke speed was set at 30 strokes per minute.

Result

Case Study

Clear signs of wear are observed after 2000 strokes with both the wet and dry test. It was shown that the wet test showed
more severe results than the dry test. Multiple tests showed that the AB5020 provides reproducible results and therefore it
has been proven the TQC scrub test performs well as system to test and quantify the wear resistance of yachtpaints.

Get a Quote

Related Products

  • View products Details

    Pencil Hardness Test acc. Wolff Wilborn

    Shop
    More info
    call for prices
    Industrial Physics

Company

  • Profile
  • Legal
  • Addresses
  • Terms and Conditions
  • Driver directions

Products

  • Shop
  • New products

News

  • NEWS AND PRESS RELEASES
  • Newsletter
  • Vacancies

Service

  • Software downloads
  • Repairs / Calibrations
  • RMA Form (pdf)
  • Terms and Conditions
  • Quality

Contact

  • The Netherlands
  • +31 (0)10 - 7900 100
  • [email protected]
  •  
  • Italy
  • +39 0362-1822230
  • [email protected]
  •  
  • Norway
  • +47 333 10220
  • [email protected]
  •  
  • Korea
  • +82 (0) 31 982 7074
  • [email protected]
  •  
  • Latin America
  • +52 55 11 06 20 91
  • [email protected]
    industrialphysics.com
  •  
  • China
  • +86 400-821-0694
  • [email protected]
    industrialphysics.com

 

  • Germany
  • +49 (0)2103 - 25326 - 0
  • [email protected]
  •  
  • USA
  • +1 810 - 797 - 8300
  • [email protected]
  •  
  • United Kingdom
  • +44 (0) 2039 3635 65
  • [email protected]
  •  
  • UK, Africa, Middle East
  • +44 (0) 2039 3635 65
  • +44 (0)7771 3557 34
  • [email protected]
  •  
  • Europe
  • +31 (0)10 - 7900 100
  • +31 (0)6- 5316 8226
  • [email protected]
  •  
  • South East Asia
  • +65 9821 - 1107
  • [email protected]
    industrialphysics.com
Industrial Physics Inks & Coatings B.V. © Copyright 2020. All Rights Reserved. | TQC Sheen is an Industrial Physics company legal | sitemap