ISO 17872

Paints and varnishes — Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing ISO 17872:2007 describes methods of scribing coated steel or test-pieces for corrosion tests, where the coating system is applied at dry film thicknesses of less than 500 micrometres. It is intended as a guideline...

Paints and varnishes — Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing

ISO 17872:2007 describes methods of scribing coated steel or test-pieces for corrosion tests, where the coating system is applied at dry film thicknesses of less than 500 micrometres. It is intended as a guideline only, being based on the results of a collaborative trial with no subsequent corrosion testing having been carried out to determine the suitability of the introduced scribe marks for such tests.

ISO 17872:2007 covers the scribing of metallic panels or test pieces made from

steel,
chemically treated steel,
aluminium or aluminium alloy, and
chemically treated aluminium.

It does not cover the scribing of galvanized or electroplated metal or clad aluminium panels.


more

1개의 결과 표시